AcademyTips.Com
Welcome to another FREE Woodworking Resource sponsored by your fellow
woodworkers at Shopsmith

 

Frame and Raised Panel Construction
Making professional-looking cabinet doors is easier than you think!

Step 6

Replace your MARK V’s saw table insert with a zero-clearance insert . Using a shop-built panel raising fixture set your MARK V’s table tilt angle to 15-degrees. Adjust the rip fence so the  inside set of teeth are 3/16-inch from the fence face (as shown). With the machine turned OFF, grab your MARK V’s auxiliary spindle and hand-twist the blade through a revolution to be certain of the clearance.

 

Send For Your FREE Woodworking Fact Kit and "Sawdust Therapy" TV Show.

First Name*:
Last Name*:
Street Address*:
 
City*:
State*:
Zip*:
Country*:

USA Canada
Other

E-mail Address*:

 © 2009 Shopsmith Inc. All rights reserved.
Return to Academy Tips Index
Policies | Contact Us | Links | Corporate Web Site