AcademyTips.Com
Welcome to another FREE Woodworking Resource sponsored by your fellow
woodworkers at Shopsmith

 

Frame and Raised Panel Construction
Making professional-looking cabinet doors is easier than you think!

Step 2
Use your dado set-up to cut the panel grooves in the stiles and rails. In our example, we used just the two outer dado blades from our Shopsmith set, with no chippers and cut a 1/4-inch wide groove. Center the blade set in the table insert and set your blades to make a 1/2-inch deep cut. Now, adjust your MARK V’s Rip Fence so it’s 1/4-inch from the right side of your dado blades.

 

Send For Your FREE Woodworking Fact Kit and "Sawdust Therapy" TV Show.

First Name*:
Last Name*:
Street Address*:
 
City*:
State*:
Zip*:
Country*:

USA Canada
Other

E-mail Address*:

 © 2009 Shopsmith Inc. All rights reserved.
Return to Academy Tips Index
Policies | Contact Us | Links | Corporate Web Site